631-667-8411

Call Us 

You must maintain your equipment to prevent future problems and unwanted expenses. Svedi can keep your cooling and heating system at peak performance by having our experiences technicians do annual check-ups. Remember, you might plan the check-ups around the time changes in the spring and fall. Checklist Provided by Energystar.gov

A typical maintenance check-up should include the following.

Check thermostat settings to ensure the cooling and heating system keeps you comfortable when you are home and saves energy while you are away.
Tighten all electrical connections and measure voltage and current on motors. Faulty electrical connections can cause unsafe operation of your system and reduce the life of major components.
Lubricate all moving parts. Parts that lack lubrication cause friction in motors and increases the amount of electricity you use.
Check and inspect the condensate drain in your central air conditioner, furnace and/or heat pump (when in cooling mode). A plugged drain can cause water damage in the house and affect indoor humidity levels.
Check controls of the system to ensure proper and safe operation. Check the starting cycle of the equipment to assure the system starts, operates, and shuts off properly.

Cooling Specific

Clean evaporator and condenser air conditioning coils. Dirty coils reduce the system’s ability to cool your home and cause the system to run longer, increasing energy costs and reducing the life of the equipment.
Check your central air conditioner’s refrigerant level and adjust if necessary. Too much or too little refrigerant will make your system less efficient increasing energy costs and reducing the life of the equipment.
Clean and adjust blower components to provide proper system airflow for greater comfort levels. Airflow problems can reduce your system’s efficiency by up to 15 percent.

Heating Specific

Check all gas (or oil) connections, gas pressure, burner combustion and heat exchanger. Improperly operating gas (or oil) connections are a fire hazard and can contribute to health problems. A dirty burner or cracked heat exchanger causes improper burner operation. Either can cause the equipment to operate less safely and efficiently.

Actions To Do Yourself

Inspect, clean, or change air filters once a month in your central air conditioner, furnace, and/or heat pump. Svedi can show you how to do this.  A dirty filter can increase energy costs and damage your equipment, leading to early failure.

Maintaining your system will save you a fortune. Seriously, not only will your heating system work more efficiently – because a clean running system uses less fuel – it also extends the life of the system you own. And a maintained system is a safe system.

Doesn’t it make sense to call Svedi so we can clean and check your system every season? And with Svedi’s low pricing, the maintenance will pay for itself.